This is the owner of sapworld.info Jack Park. I have to say sorry to everyone that I already moved my blog’s data to new blog www.saplab.net…

Because, I always can not connect this blog sapworld.info.

From now on. you can connect to my new blog www.saplab.net

Feed: http://feed.saplab.net

Blog: http://www.saplab.net

Email: info@saplab.net

Domain  www.sapworld.info for sale~

Thanks a lot

SAP Business Suite
当前SAP公司的主力产品包，里面包含了mySAP ERP, mySAP CRM, mySAP SCM …. 几乎是SAP的所有东东。如果购买的是此种许可证，就意味着几乎可以用SAP的所有产品的功能－－某些特定行业的特定引擎（Engine）除外。

mySAP ERP
主要就是以前的SAP R/3加上SAP最新的集成平台SAP Netweaver。

mySAP CRM
之所以叫mySAP CRM而不是SAP CRM，就是为了突出SAP的CRM产品是以客户为中心的、灵活可配置的……所以叫”my***“，mySAP CRM主要就是包括SAP的CRM产品功能包（Logic Box）再加上SAP最新的集成平台SAP Netweaver。

SAP Netweaver
是SAP最新的集成应用平台，一方面SAP用这么一个平台来集成SAP与非SAP（Oracle, Siebel, …）应用系统；另一方面SAP把一些各个系统都可以通用的功能放入此平台中，如SAP门户（ SAP Portal）可以访问各种SAP应用系统（ERP, CRM…）及非SAP系统、SAP商务智能（SAP BI）可以对来自各种系统的数据进行分析……

mySAP.com
这是前几年SAP为了迎合网络风潮而给自己的产品包改的名字，它跟www.mySAP.com这个网站没有任何实质关系，其实它就是现在的SAP Business Suite。

SAP R/3
以前SAP公司的主力产品，包括大家非常熟悉的SD, MM, FI, CO, PP..等模块。但从今年起SAP已经不再单独出售R/3的许可证，代之以mySAP ERP。也就意味着客户无论选择SAP的何种产品（mySAP ERP, mySAP CRM…）都会得到SAP Netweaver，其中包括了SAP Portal 与SAP BW的使用许可。

SAP All-in One (SAP A1)
在SAP R/3的基础上，SAP做了一些预配置，然后按不同行业交给咨询合作伙伴，由他们再加一些预配置，然后以咨询合作伙伴的名义将加了预配置的系统销售给用户。内含mySAP CRM的部分功能。

SAP Business One (SAP B1)
在SAP收购的另一家公司的产品基础上改造而成，优点是价格低廉，并且由于数据结构相同可以无缝地将系统升级至SAP A1, SAP Business Suite。SAP B1中有CRM功能，但远不及mySAP CRM系统中的那么强大。
SAP Release版本之间的差异和关系：
版本4.6C以前是所谓传统的R3系统，建立在SAP Basis的基础上；
版本4.70以后，改为R3 Enterprise,最大的变化是SAP WEB AS取代了传统的Basis，核心业务功能模块也作了划分；
R3 Enterprise之后改称为mySAP ERP2004,基础平台演变成SAP NetWeaver,并产生SAP ECC (ECC = ERP Central Component) ，作为Enterprise的替代，并集成了BW,SEM和ITS；
2005第4季度开始mySAP ERP2005的准备，最大的变化将是全面转向ESA体系（基于消息机制的企业应用体系），并引入了新的功能模块，比如PLM和SRM.

出处：http://suyupingsap.spaces.live.com/blog/cns!95699BAF91402C38!182.entry?&_c02_owner=1

写法1：

SELECT MATNR BUDAT
INTO(ITAB-MATNR,ITAB-BUDAT)
FROM AUFM
WHERE MATNR IN P_MATNR AND
BUDAT IN P_BUDAT.

写法2：

SELECT MATNR BUDAT
INTO corresponding fields of table itab
FROM AUFM
WHERE MATNR IN P_MATNR AND
BUDAT IN P_BUDAT.

以前的程序运行所得的结果都是一样的， 但获取数据的速度，方法1 比方法2 快， 为什么呢？

取少数项目值时用INTO赋值到 变量中，取得项目多时应使用INTO TABLE，
对应的内表中的项目定义顺序最好和SELECT所选项目顺序相同，然后直接使用INTO TABLE itab，
而不是用CORRESPONDING FIELD，CORRESPONDING FIELD语句使编程人员方便编程，
不用一个一个对照项目顺序，但实际上这部分功能没有省，而是系统替你来完成的，
系统赋值前，要先对照是否项目名相同，相同才赋，不同继续向下比较，所以很费系统资源，
编程序本身就是“一劳永逸”的事情，还是建议在编写的时候多费点心思调整好，
可为将来千万次的调用，提高意想不到的效率。

http://blog.csdn.net/zwxrain/archive/2008/03/11/2168767.aspx

1、使用where语句
不推荐
Select * from zflight.
Check : zflight-airln = ‘LF’ and zflight-fligh = ‘BW222’.
Endselect.
推荐
Select * from zflight where airln = ‘LF’ and fligh = ‘222’.
Endselect.

2、使用聚合函数
不推荐
Maxnu = 0.
Select * from zflight where airln = ‘LF’ and cntry = ‘IN’.
Check zflight-fligh > maxnu.
Maxnu = zflight-fligh.
Endselect.
推荐
Select max( fligh ) from zflight into maxnu where airln = ‘LF’ and cntry = ‘IN’.

3、使用视图代替基本表查询
不推荐
Select * from zcntry where cntry like ‘IN%’.
Select single * from zflight where cntry = zcntry-cntry and airln = ‘LF’.
Endselect.
推荐
Select * from zcnfl where cntry like ‘IN%’ and airln = ‘LF’.
Endselect.

4、使用INTO table 代替select endselect
不推荐
Refresh: int_fligh.
Select * from zflight into int_fligh.
Append int_fligh. Clear int_fligh.
Endselect.
推荐
Refresh: int_fligh.
Select * from zflight into table int_fligh.

5、使用批量修改内表代替逐行修改
不推荐
Loop at int_fligh.
If int_fligh-flag is initial.
Int_fligh-flag = ‘X’.
Endif.
Modify int_fligh.
Endloop.
推荐
Int_fligh-flag = ‘X’.
Modify int_fligh transporting flag where flag is initial.

6、使用二分法查询，提高查询内表数据速度
不推荐
Read table int_fligh with key airln = ‘LF’.
推荐
Read table int_fligh with key airln = ‘LF’ binary search.

7、两个内表添加使用批量增加代替逐行
不推荐
Loop at int_fligh1.
Append int_fligh1 to int_fligh2.
Endloop.
推荐
Append lines of int_fligh1 to int_fligh2.

8、使用table buffering
Use of buffered tables is recommended to improve the performance considerably. The buffer is bypassed while using the following statements
Select distinct
Select … for update
Order by, group by, having clause
Joins
Use the Bypass buffer addition to the select clause in order to explicitly bypass the buffer while selecting the data.

9、 使用FOR ALL Entries
不推荐
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
推荐
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.

10、正确地使用where语句，使查询能使用索引
When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields. One more tip is that if a table begins with MANDT, while an index does not, there is a high possibility that the optimizer might not use that index.

11、正确地使用MOVE语句
Instead of using the move-corresponding clause it is advisable to use the move statement instead. Attempt should be made to move entire internal table headers in a single shot, rather than moving the fields one by one.

12、正确地使用inner join
Let us take an example of 2 tables, zairln and zflight. The table zairln has the field airln, which is the airline code and the field lnnam, which is the name of the airline. The table zflight has the field airln, the airline code and other fields which hold the details of the flights that an airline operates.
Since these 2 tables a re logically joined by the airln field, it is advisable to use the inner join.
Select a~airln a~lnnam b~fligh b~cntry into table int_airdet
From zairln as a inner join zflight as b on a~airln = b~airln.
In order to restrict the data as per the selection criteria, a where clause can be added to the above inner join.

13、使用sort by 代替order by

14、避免使用SELECT DISTINCT语句
使用的 ABAP SORT + DELETE ADJACENT DUPLICATES 代替.

15、使用select 字段列表代替 Select *
不推荐
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE ‘CHAR%’
AND AS4LOCAL = ‘A’.
ENDSELECT.
推荐
SELECT DOMNAME FROM DD01L
INTO DD01L_WA-DOMNAME
WHERE DOMNAME LIKE ‘CHAR%’
AND AS4LOCAL = ‘A’.
ENDSELECT.

16、使用subquery代替多个select语句
不推荐
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = ‘FRANKFURT’
AND CITYTO = ‘NEW YORK’.
SELECT * FROM SFLIGHT AS F
INTO SFLIGHT_WA
FOR ALL ENTRIES IN T_SPFLI
WHERE SEATSOCC < F~SEATSMAX
AND CARRID = T_SPFLI-CARRID
AND CONNID = T_SPFLI-CONNID
AND FLDATE BETWEEN ‘19990101′ AND ‘19990331′.
ENDSELECT.
推荐
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
WHERE SEATSOCC < F~SEATSMAX
AND EXISTS ( SELECT * FROM SPFLI
WHERE CARRID = F~CARRID
AND CONNID = F~CONNID
AND CITYFROM = ‘FRANKFURT’
AND CITYTO = ‘NEW YORK’ )
AND FLDATE BETWEEN ‘19990101′ AND ‘19990331′.
ENDSELECT.

17、如何快速删除重复内表的记录
不推荐
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
DELETE ITAB.
ELSE.
PREV_LINE = WA.
ENDIF.
ENDLOOP.
推荐
DELETE ADJACENT DUPLICATES FROM ITAB
COMPARING K.

18、如何快速删除内表一定范围内的记录
不推荐
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
推荐
DELETE ITAB FROM 450 TO 550.

19、使用collect语句代替人工合计计算结果
不推荐
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
ADD: WA1-VAL1 TO WA2-VAL1,
WA1-VAL2 TO WA2-VAL2.
MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
推荐
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.

20、使用显示的work area 代替默认的work area
不推荐
ITAB = WA.
APPEND ITAB.
推荐
APPEND WA TO ITAB.

21、使用LOOP …ASSIGNING代替loop … modify.
不推荐（整条记录更新）
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
WA-FLAG = ‘X’.
MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
推荐（只会更新需要修改内容）
LOOP AT ITAB ASSIGNING .
I = SY-TABIX MOD 2.
IF I = 0.
-FLAG = ‘X’.
ENDIF.
ENDLOOP.

Technorati Tags: ABAP

*———————————————————————-*

* REPORT Z_TRANSACTIONS *

*———————————————————————-*

* TEXT ELEMENTS

* ————-

* Heading

* Transaction code Text

*

* Selection texts

* P_DNLD Download?

* P_FILE Filename:

* S_SPRSL Language:

* S_TCODE Transaction Code:

*

* Text Symbols

* 001 Transaction Selection

* 002 Download Option

* 003 Filename

*———————————————————————-*

REPORT z_transactions.

TABLES: tstct.

TYPES: BEGIN OF itab_tx,

tcode LIKE tstct-tcode,

ttext LIKE tstct-ttext,

END OF itab_tx.

DATA: itab_tx TYPE itab_tx OCCURS 0 WITH HEADER LINE,

tx TYPE itab_tx,

itab_file LIKE sval OCCURS 0 WITH HEADER LINE,

p_file LIKE rlgrap-filename,

returncode LIKE sy-subrc,

filestring TYPE string.

DATA: BEGIN OF fields OCCURS 2.

INCLUDE STRUCTURE sval.

DATA: END OF fields.

* text-001 = Transaction Selection

SELECTION-SCREEN BEGIN OF BLOCK transx WITH FRAME TITLE text-001.

SELECT-OPTIONS: s_tcode FOR tstct-tcode,

s_sprsl FOR tstct-sprsl.

SELECTION-SCREEN END OF BLOCK transx.

* text-002 = Download Option

SELECTION-SCREEN BEGIN OF BLOCK dld WITH FRAME TITLE text-002.

PARAMETERS: p_dnld TYPE c AS CHECKBOX.

SELECTION-SCREEN END OF BLOCK dld.

AT SELECTION-SCREEN OUTPUT.

p_file = ‘C:\SAPTXlist.xls’.

p_dnld = ‘X’.

MOVE ‘I’ TO s_sprsl-sign.

MOVE ‘EQ’ TO s_sprsl-option.

MOVE ‘EN’ TO s_sprsl-low.

APPEND s_sprsl.

START-OF-SELECTION.

REFRESH itab_tx.

SELECT * FROM tstct INTO CORRESPONDING FIELDS OF TABLE itab_tx

WHERE tcode IN s_tcode AND sprsl IN s_sprsl.

IF sy-subrc <> 0.

MESSAGE s265(sf).

ELSE.

SORT itab_tx BY tcode.

LOOP AT itab_tx.

WRITE: /1 itab_tx-tcode(20),

AT 20 itab_tx-ttext.

ENDLOOP.

IF p_dnld = ‘X’.

CLEAR fields.

fields-tabname = ‘RLGRAP’.

fields-fieldname = ‘FILENAME’.

fields-value = p_file.

fields-field_attr = ‘00′.

APPEND fields.

CALL FUNCTION ‘POPUP_GET_VALUES’

EXPORTING

popup_title = text-003

IMPORTING

returncode = returncode

TABLES

fields = fields

EXCEPTIONS

error_in_fields = 1

OTHERS = 2.

CHECK returncode EQ space.

filestring = fields-value.

CALL FUNCTION ‘GUI_DOWNLOAD’

EXPORTING

filename = filestring

write_field_separator = ‘,’

TABLES

data_tab = itab_tx

EXCEPTIONS

file_write_error = 1

no_batch = 2

gui_refuse_filetransfer = 3

invalid_type = 4

no_authority = 5

unknown_error = 6

header_not_allowed = 7

separator_not_allowed = 8

filesize_not_allowed = 9

header_too_long = 10

dp_error_create = 11

dp_error_send = 12

dp_error_write = 13

unknown_dp_error = 14

access_denied = 15

dp_out_of_memory = 16

disk_full = 17

dp_timeout = 18

file_not_found = 19

dataprovider_exception = 20

control_flush_error = 21

OTHERS = 22.

IF sy-subrc <> 0.

MESSAGE s999(b1) WITH ‘File ‘ filestring

‘ NOT created!’.

ELSE.

MESSAGE s999(b1) WITH ‘File ‘ filestring

‘ Created successfully!’.

ENDIF. “Check on download success

ENDIF. “Download

ENDIF. “Check on selection

Technorati Tags: SAP,ABAP,List,TCODE

START-OF-SELECTION.

* ASSUMPTION: All quantities are in sales units. Since quantities

* are summed to the material group level, it is assumed that all

* materials within a material group have the same sales unit of

* measure.

  select a~kunag a~vbeln a~fkdat a~bukrs a~vbtyp

         b~matkl b~matnr b~arktx b~fkimg b~kzwi2 b~wavwr

         c~name1

         d~kunn2

     into corresponding fields of table replines

        from vbrk as a

          inner join vbrp as b

             on a~vbeln = b~vbeln

          inner join kna1 as c

             on a~kunag = c~kunnr

          left outer join knvp as d

             on a~kunag = d~kunnr and

                a~vkorg = d~vkorg and

                a~vtweg = d~vtweg and

                d~spart = ‘71′ and

                d~parvw = ‘CO’ and

                d~parza = ‘000′

          where a~vkorg = ‘7100′ and

                a~vbtyp in r_vtyp and

                a~fkdat in s_date and

                a~kunag in s_cust and

                b~matkl in s_mgrp and

                b~autyp in r_atyp.

END-OF-SELECTION.

REPORT ztablexls.

********************************************************************

* Developer : S.Srini.

* Location : Chennai,

* : Tamil Nadu,

* : India.

* Date : 3/10/2001.

********************************************************************

* TESTED - MS EXCEL 97

* NOT RECOMMENDED FOR LENGTHY OUTPUT AND LARGE DATA TABLE BROWSING

********************************************************************

TABLES: USR03,DD02L.

DATA: ZX030L LIKE X030L.

DATA BEGIN OF ZDFIES OCCURS 0.

INCLUDE STRUCTURE DFIES.

DATA END OF ZDFIES.

DATA: BEGIN OF FLDITAB OCCURS 0,

FLDNAME(11) TYPE C,

END OF FLDITAB.

DATA ITABUSR03 LIKE USR03 OCCURS 0 WITH HEADER LINE.

DATA TNAME LIKE DD02L-TABNAME.

SELECT * FROM USR03 INTO TABLE ITABUSR03.

TNAME = ‘USR03′.

PERFORM GETFIELEDS.

PERFORM SHOW123.

********************************************

FORM GETFIELEDS.

CALL FUNCTION ‘GET_FIELDTAB’

EXPORTING

LANGU = SY-LANGU

ONLY = SPACE

TABNAME = TNAME

WITHTEXT = ‘X’

IMPORTING

HEADER = ZX030L

TABLES

FIELDTAB = ZDFIES

EXCEPTIONS

INTERNAL_ERROR = 01

NO_TEXTS_FOUND = 02

TABLE_HAS_NO_FIELDS = 03

TABLE_NOT_ACTIV = 04.

CASE SY-SUBRC.

WHEN 0.

LOOP AT ZDFIES.

FLDITAB-FLDNAME = ZDFIES-FIELDNAME.

APPEND FLDITAB.

ENDLOOP.

WHEN OTHERS.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

with SY-SUBRC.

ENDCASE.

ENDFORM.

***********************************

FORM SHOW123.

CALL FUNCTION ‘EXCEL_OLE_STANDARD_DAT’

EXPORTING

FILE_NAME = ‘C:\USR03.XLS’

DATA_SHEET_NAME = ‘USER LIST’

TABLES

DATA_TAB = ITABUSR03

FIELDNAMES = FLDITAB

EXCEPTIONS

FILE_NOT_EXIST = 1

FILENAME_EXPECTED = 2

COMMUNICATION_ERROR = 3

OLE_OBJECT_METHOD_ERROR = 4

OLE_OBJECT_PROPERTY_ERROR = 5

INVALID_FILENAME = 6

INVALID_PIVOT_FIELDS = 7

DOWNLOAD_PROBLEM = 8

OTHERS = 9.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM.

Download 

T-code Des.

F.52 G/L: Acct Bal.Interest Calculation 总帐:计算科目余额利息
F-06 Post Incoming Payments 收款记帐
F-07 Post Outgoing Payments 付款记帐
FB1S Clear G/L Account 结算总分类帐科目
FB41 Post Tax Payable 应付税款记帐
FBB1 Post Foreign Currency Valuation 外币评估记帐
FBL3 Display G/L Account Line Items 显示总帐科目行项目
FBL4 Change G/L Account Line Items 更改总分类帐科目的行项目
FBX0 Change Documents for Ext.Documents 外部凭证的更改凭证
FBX1 Post External Documents Received 收到外部凭证记帐
FBX2 Change External Documents to be Sent 更改将送出的外部凭证
FBX3 Display Extern.Documents to be Sent 显示将送出的外部凭证
FBX4 Change External Documents Received 更改收到的外部凭证
FBX5 Display External Documents Received 显示收到的外部凭证
FBX6 Transfer: Extern.Documents to File 传输：外部凭证到文件
FBX7 Load External Documents from File 从文件中装载外部凭证
FS01 Create Master Record 创建主记录
FS02 Change Master Record 更改主记录
FS03 Display Master Record 显示主记录
FS04 G/L Account Changes (Centrally) 总帐科目更改(集中地)
FS05 Block Master Record 冻结主记录
FS06 Mark Master Record for Deletion 把主记录标识为删除
FS10 G/L Account Balance 总分类帐科目余额
FSAA Display Address for Bal.Confirmatns 显示余额确认地址
FSE2 Change Financial Statement Version 更改财务报表版本
FSE3 Display Financial Statement Version 显示财务报表版本
FSE4 Planning Preparation 计划准备
FSE5 Maintain Planning 计划维护
FSE6 Display Planning 显示计划
FSE7 Maint.Bal.Sht/P+L Forgn Lang.Texts 维护资产负债表/利润表外语长文本
FSE8 Display Forgn Lang.Bal.Sht/P+L Texts 显示外文的资产负债表/利润表文本
FSE9 Automatic Balance Sheet/P+L Form 自动资产负债表/利润表
FSM1 Create Sample Account 创建样本帐户
FSM2 Change Sample Account 更改样本帐户
FSM3 Display Sample Account 显示样本帐户
FSM4 Sample Account Changes 样本科目更改
FSM5 Delete sample account 删除样本科目
FSMN 总帐菜单 总帐菜单
FSP1 Create Master Record in Chart/Accts 创建会计科目表中的主记录
FSP2 Change master record in chart/accts 更改会计科目表中的主记录
FSP3 Display Master Record in Chart/Accts 显示会计科目表的主记录
FSP4 G/L Account Changes in Chart/Accts 会计科目表中的总帐科目变化
FSP5 Block Master Record in Chart/Accts 冻结会计科目表中主记录
FSP6 Mark Mast.Rec.for Del.in Chart/Accts 在科目表中的主记录上作标记以备删除
FSS1 Create Master Record in Company Code 创建公司代码中的主记录
FSS2 Change Master Record in Company Code 更改公司代码中的主记录
FSS3 Display Master Record in Comp.Code 显示公司代码中的主记录
FSS4 G/L Account Changes in Company Code 公司代码中的总帐科目修改
FSSA Display Bal.Confirmatns Sel.Criteria 显示余额确认选择标准
FSSP Change Bal.Confirmatns Sel.Criteria 改变余额确认选择标准
FST2 Maintain Account Name 维护帐户名
FST3 Display Account Name 显示帐户名
GLT0 Flexible General Ledger 灵活的总帐
GSP1 Allocation method 分摊方式
GSP2 Line category 行类别
GSP3 Business processes 业务处理
GSP4 Determine line categories from acct 从科目的确定的目录行
GSP5 Derive activity 引导业务
GSP6 Define field control per ledger 每个分类帐定义字段控制
GSP6GEN Doc split: Generation 明细凭证：生成
GSP8 Doc. type assignment - process 凭证类型分配 - 处理
GSP9 Allocation Rule 分配规则
GSPA Define account determination key 定义科目确定码
GSPB Acct determination - posting key 科目确定 - 过帐码
GSPD Business processes 业务处理
F.28 A/R: Reset Credit Limit 应收帐：重置信贷限额
F.31 Credit Management - Overview 信贷管理 — 概览
F.32 Credit Management - Missing Data 信贷管理 — 遗漏数据
F.33 Credit Management - Brief Overview 信贷管理 — 简要概览
F.34 Credit Management - Mass Change 信贷管理 - 批变化
F.35 Credit Master Sheet 贷方主表
FD10 Customer Account Balance 客户科目余额
FD11 Customer Account Analysis 客户帐户分析
FD24 Credit Limit Changes 信贷限额变化
FD32 Change Customer Credit Management 更改客户信贷管理
FD33 Display Customer Credit Management 显示客户贷款管理
FD37 Credit Management Mass Change 信贷管理批变化
AR01 Call Up Asset List 调用资产清单
AR02 Call Up Asset History Sheet 调用资产历史数据表
AR03 Call Up Depreciation List 调用折旧清单
AR04 Call Up Depreciation + Interest List 调用折旧 + 利息清单
AR05 Call Up Asset Acquisition List 调用资产购置清单
AR06 Call Up Asset Retirement List 调用资产报废清单
AR07 Call Up Asset Transfer List 调用资产转帐清单
AR08 Call Up Depreciation Compare List 调用折旧比较清单
AR14 Call Up Manual Depreciation List 调用手工折旧清单
AR18 Call Up Depr.Simulation 调用折旧模拟
AR19 Call Up List of Origins 调用初始清单
AR20 Retirement comparison 报废比较
AR21 Mid-quarter Alert Report 季度中期警告报告
AR22 Analysis of retirment revenue 报废收入的分析
AR26 Call up special reserve list 调用特殊收入清单
AR27 Call up: Group asset list 调用:集团公司资产清单
AR28 Call up asset history 调用资产历史
AR30 Display Worklist 显示工作清单
AR32 Call-up create worklist 调用创建工作清单
ARAL Display Application Log 显示应用程序日志
ARQ0 FIAA - Ad hoc reports FIAA - Ad hoc 报告
ART0 FIAA - Info system FI－AA:信息系统
OA90 AM: Asset Register AM: 资产登记
FM21 Change Original Budget 改变原预算
FM22 Display Original Budget 显示原预算
FM25 Change Supplement 改变补充
FM26 Display Supplement 显示补充
FM27 Change Return 改变返回
FM28 Transfer Budget 转移预算
FM29 Display Return 显示退回
FM2E Change Budget Document 改变预算凭证
FM2F Display Budget Document 显示预算文档
FM2T Change Releases 更改下达
FM2V Display Releases 显示下达
FM98 Change Parked Document 更改暂存凭证
FM9B Copy Budget Version 复制预算版本
FM9D Lock Budget Version 锁定预算版本
FM9E Unlock Budget Version 取消锁定预算版本
FM9F Delete Budget Version 删除预算版本
FM9G Roll Up Supplement 上滚补充
FM9H Roll up Original Budget 累加原始预算
FM9I Roll Up Return 累加返回
FM9J Roll Up Releases 累加下达
FM9K Change Budget Structure 更改预算结构
FM9L Display Budget Structure 显示预算结构
FM9M Delete Budget Structure 删除预算结构
FM9N Generate Budget Object 生成预算对象
FM9P Reconstruct Budget Distrbtd Values 重建预算分配值
FM9Q Total Up Budget 预算汇总
FMBV Activate Availability Control 激活有效性控制
FMD1 Change Carryforward Rules 更改结转规则
FMD2 Display Carryforward Rules 显示结转规则
FMG1 FM: Create Commitment Item Group FM: 创建承诺项组
FMG2 FM: Change Commitment Item Group FM: 更改承诺项组
FMG3 FM: Display Commitment Item Group FM: 显示承诺项组
FMG4 FM: Delete Commitment Item Group FM: 删除承诺项组
FMG5 Generate BS Objects fr.Cmmt Item Grp 从承诺项组生成BS 对象
FMP0 Maintain Financial Budget 维护财务预算
FMP1 Display Financial Budget 显示财务预算
FMP2 Delete Financial Budget Version 删除财务预算版本
FR01 Change Original Commitments 更改原始承诺
FR02 Display Original Commitments 显示原始承诺
FR03 Original Commitments: Prel.Posting 初始承诺额:初步过帐
FR04 Change Original Payments 更改原始收付
FR05 Display Original Payments 显示原始收付
FR07 Change Release Commitments 更改下达承诺
FR08 Display Release Commitments 显示下达承诺
FR10 Change Release Payments 更改下达收付
FR11 Display Release Payments 显示下达收付
FR13 Transfer Commitments 转帐承诺
FR14 Transfer Payments 转帐收付
FR15 Change Supplement Commitments 更改补充承诺
FR16 Display Supplement Commitments 显示补充承诺
FR17 Roll Up Supplement Commitments 上滚补充承诺
FR19 Change Supplement Payments 更改补充收付
FR20 Display Supplement Payments 显示补充收付
FR21 Roll Up Supplement Payments 上滚补充收付
FR23 Change Return Commitments 更改承诺申报表
FR24 Display Return Commitments 显示退回承诺
FR25 Roll Up Return Commitments 上滚申报表承诺
FR27 Change Return Payments 更改收付申报表
FR28 Display Return Payments 显示退回收付
FR29 Returns: Roll-Up Payments 申报表：上滚收付
FR32 Roll Up Budget Commitments 上滚预算承诺
FR33 Roll Up Budget Payments 上滚预算收付
FR34 Roll Up Commitment Releases 上滚承诺下达
FR35 Roll Up Payment Releases 上滚收付发布